Inside industry of bearing ferrule treatment, crossed copy razor blade is groovy applied razor blade, the design with traditional crossed copy general razor blade did not break bits chamfer, the problem that although this can avoid place of working procedure of abrade in producing bit course razor blade to take,comes out, but reduced the effect that break bits at the same time however, and huge arises in treatment cut bits force. Additional, the design of bit makes there is enough interface between bit and blade holder, fixed position of razor blade of as a result is not quite good; The razor blade that standardization also has no on market can offer an alternative. Dark the frame that pulls climate to break through a tradition, undertake reforming to crossed copy razor blade, development gives bit of CombiEdge crossed copy bearing, solved completely before the problem of traditional and crossed copy razor blade. CombiEdge joined the chamfer that break bits, control scrap effectively, treatment is more businesslike; Additional, the bit that CombiEdge mixes to have stability, bit fixed position is more good, because this can provide the biggest treatment stability, satisfied a lot of expectation that use the home. 2 kinds of treatment that a razor blade deals with the dominant position with the largest CombiEdge of 2 kinds of treatment to depend on it apply. Every CombiEdge crossed razor blade all has 16 cutting blade, among them 8 cutting blade can use treatment outer lane and profile modeling of inner ring circular arc (the 1) in the graph, another 8 cutting blade can undertake groovy turning (car external diameter and end panel) (the 2) in the graph. CombiEdge is special apply to bearing ferrule treatment, it produces the work with a standard essence effectively, already became today the index of bearing industry. Bit model: CE-SNMG 12014 coating: The advantage of knife of CTC1130 CombiEdge crossed bearing: A razor blade undertakes * at the same time 2 kinds of application: - 1. Outer lane and profile modeling of inner ring circular arc - 2.
Car external diameter and end panel (standard ISO razor blade) a razor blade has * 16 cutting edge: - 8 edge are used undertake circular arc turning - 8 edge are used undertake common turning * all razor blade all deserves to have bits chamfer * * of razor blade of standard of * ISO of low cutting force is usable use newest top to press type at * of standard ISO knife handle CNC Milling
CNC Machining