On personal computer treatment of implementation CNC Milling is emulated (2)

  • Time:
  • Click:366
  • source:GEOFF CNC Machining
Because these are linear Duan Jun along direction of line of sight, because this is on computer screen,expression is to nod.

What go up when the straight line segment on cutting tool and semifinished product is linear paragraph when catenary watch has identical screen coordinate, happen likely mutual the cutting between concerns.

Set there is Q1Q2 of one straight line segment on cutting tool, express corresponding screen to go up with the catenary of one straight line segment of semifinished product same elephant element, a when P1P2 expresses for catenary of this straight line segment straight line segment is unit.

Among them Q1 dot is close from the eye, inspect be worth to ZQ1 small; Q2 speck is remote from the eye, inspect be worth to ZQ2 big.

P1 dot is close from the eye, inspect be worth to ZP1 small; P2 speck is remote from the eye, inspect be worth to ZP2 big.

The 1st kind concerns.

ZP2>ZQ2>ZQ1>ZP1, if next face figures are shown 1 times.

The position of Q1Q2 of knowable straight line segment is in P1P2 between, it is P1P2 cut two paragraphs.

Graph the 1st kind of 1 relation applies for a catenary first the list is sharp paragraph of unit N1N2.

Part Q2, the color that P2 selects is worth and inspect to Z the value endows with N1, n2 dot, at the back of string together this unit.

The color that selects Q1 is worth and inspect to Z value ode gives P2 the point.

The 2nd kind concerns.

ZP2>ZQ2>ZP1>ZQ1, following graphs are shown 2 times.

The close end of P1P2 of cutting of Q1Q2 of knowable straight line segment.

Graph the color that the 2nd kind of 2 relations select Q2 is worth and inspect to Z value ode gives P1 the point.

If P1P2 of straight line segment is the first unit that this catenary expresses, the color that should revise P1 to nod a corresponding screen at the same time is worth.

The 3rd kind concerns.

ZP2>ZP1>ZQ2>ZQ1, following graphs are shown 3 times.

Q1Q2 of knowable straight line segment and P1P2 did not produce cutting to concern.

Graph the 3rd kind of 3 impacts affect the 4th kind.

ZQ2>ZP2>ZQ1>ZP1, following graphs are shown 4 times.

The far end of P1P2 of cutting of Q1Q2 of knowable straight line segment.

Graph the color that the 4th kind of 4 relations select Q1 is worth and inspect to Z value ode gives P2 the point.

The 5th kind concerns.

ZQ2>ZQ1>ZP2>ZP1, following graphs are shown 5 times.

Q1Q2 of knowable straight line segment and P1P2 did not produce cutting to concern.

Graph the 5th kind of 5 impacts affect the 6th kind.

ZQ2>ZP2>ZP1>ZQ1, following graphs are shown 6 times.

P1P2 of cutting of Q1Q2 of knowable straight line segment makes a straight line segment.

CNC Milling CNC Machining